Wireless N300 ADSL2+ High Power Modem Router
15
4.1.6 DHCP
Here you can view the DHCP leases, including IP and MAC addresses of the PCs, hostnames and remaining lease time
as seen in the screenshot:
4.2 Advanced Setup
4.2.1 Layer2 Interface
Click
Advanced Setup > Layer2 Interface
to enter the Layer2 Interface screen.
This router provides two Layer2 Interfaces:
- ATM Interface
for ADSL broadband Internet service. (By default, system applies the ATM Interface [ADSL uplink].)
- ETH Interface
for connecting to the Internet via an Ethernet cable.
If you directly connect to the ADSL line via a phone cable, first refer to
To Set up the ATM interface
and then skip
to
To Set up WAN Service for ATM Interface
.
If you connect to the Internet via a fiber/cable modem using an Ethernet cable, first refer to
To Set up the ETH
interface
and then skip to
To Set up WAN Service for ETH Interface
.
