Wireless N300 ADSL2+ High Power Modem Router
5
DC
Used to connect to the power adapter, which is included in the package.
ON/OFF
Power switch to turn the router on or off.
2.2 Install the Device
①
Connect the included power adapter to your router and turn on the router.
②
Connect your computer to your router.
③
Connect your router to the Internet. Choose
ADSL Mode
or
ETH Mode
according to your actual Internet service
type.
ADSL Mode
(Phone cable access)
With a telephone
Simply connect the DSL line to the DSL port of your router.
Without a telephone
Use the splitter as a medium:
1) Connect the DSL line from the Internet side to the LINE port of
the splitter;
2) Connect the telephone with a phone cable to the PHONE port of
the splitter;
3) Connect the MODEM port of the splitter and DSL port of your
router via another phone cable.
ETH Mode
(Ethernet cable access)
Do not go to
Step 3
(connect the Ethernet cable to the LAN/WAN port) until you finish the
Primary Setup of Internet connection type on the Web Management Homepage, i.e., finish
settings in
Ethernet Mode
in
Chapter 3 Quick Internet Setup >3.2 Internet Setup.
