Add Lockout Frequency (F6)
Set Attack Rate (G1)
Delete Lockout Frequency (F7)
Format:
(Set command)
*F6NNFFFFFFFFFF<dot>BBBBBB<cr>
(Get command)
?F6NN<cr>
Response
:
F6NNFFFFFFFFFF<dot>BBBBBB<cr>
Definitions:
NN= Specifies the record number where the lockout frequency is stored. Valid record numbers
0-49.
Note: If NN value is 00 the radio will respond with all the record numbers and values that are
programmed in the following format:
F6NNFFFFFFFFFF<dot>BBBBBB<cr>
F6NNFFFFFFFFFF<dot>BBBBBB<cr>
F6NNFFFFFFFFFF<dot>BBBBBB<cr> …..etc.
:
FFFFFFFFFF=specifies the 10 digit ASCII/decimal frequency value to lock out when tuning.
Leading zeros can be omitted but the <dot> character must be transmitted to differentiate
between the frequency and the bandwidth values.
BBBBBB=specifies the 6 digit ASCII/decimal bandwidth to add/subtract from the specified
Format:
(Set command)
*F8NNSSSSSSSSSS<dot>EEEEEEEEEE<cr>
1)
(Get command)
?F8NN<cr>
1)
Response:
F8NNSSSSSSSSSS<dot>EEEEEEEEEE<cr>
Definitions:
NN—specifies the record number 0-24
Note: If NN value is 00 the radio will respond with all the record numbers and values that are
programmed in the following format:
*F8NNSSSSSSSSSS<dot>EEEEEEEEEE<cr>
*F8NNSSSSSSSSSS<dot>EEEEEEEEEE<cr>
1)
*F8NNSSSSSSSSSS<dot>EEEEEEEEEE<cr>
SSSSSSSSSS- Specifies the starting frequency for the lockout range entered in ASCII/decimal
format. . Leading zeros can be omitted but the <dot> character must be transmitted to
differentiate between the leading frequency and the ending frequency values.
Range 0-3Ghz
EEEEEEEEEE- Specifies the ending frequency for the lockout range entered in ASCII/decimal format.
Leading zero’s can be omitted. Range 2 MHz-3 GHz.
Format:
(Set command)
*F7NN<cr>
(Get command)
(Not applicable)
Definitions:
NN= Specifies the record number in which to delete the lockout frequency value that is stored
there 0-49.
Add Lockout Frequency Range (F8)
7-14
