Automatic Gain Control (C5)
Detection Mode (C7)
Format:
(Set Command) *C7M<cr>
(Get Command) ?C7<cr>
Definitions:
M
=<A>=AM, <U>=USB, <L>=LSB, <C>=CWU, <W>=CWL, <F>=FM, <K>=FSK
The detection mode command determines how the signal is to be demodulated. The Receiver
Supports AM, USB, LSB, CWU, CWL, FM and FSK detection modes.
Memory Recall ( C8)
Format:
(Set command)
*
C7M<cr>
(Get command)
?C7<cr>
Response: C7M<cr>
Definitions:
M
= <A>=AM, <U>=USB, <L>=LSB, <C>=CWU, <F>=FM , <W>=CWL, <K>-= FSK
The detection mode command determines how the signal is to be demodulated. The receiver
supports AM, USB, LSB, CWU, FM, CWL, FSK detection modes. The detection mode will be
selected for the current frequency selected by the receiver.
AUTO MODE??
The receiver provides 3 preset Automatic Gain Control rates and a programmable AGC mode. The
operator may select Slow, Medium, Fast or Programmable via the C5 command. The three modes are
selected as defined:
Format:
(Set command)
*
C5X<cr>
(Get command)
?C5<cr>
Response: C5X<cr>
Definitions:
X
=<S>-- select SLOW mode <M>--selects MEDIUM mode <F>--selects FAST mode
<P>--Programmable Mode
Default--<M> MEDIUM setting
If programmable mode is selected, the radio will use the value entered via the G1, G2 and G3 (Set
Attack, Decay and Hang Rate) command
.
Format:
(Set command)
*
C8nnn<cr>
(Get command)
?C8nnn<cr> Where nnn is value between 0 and 999
Definitions: Command used to recall memory channel contents. If memory empty, then no
action is taken.
7-8
