GrandBed TEMPUR
®
Advanced Ergo System
™
STEP 12
Install headboard brackets if they are being used and
adjust to allow a minimum of two inches clearance to
permit unobstructed movement.
NOTE: All tools necessary for installation are
included in the box.
STEP 13
Install mattress retainer bar at the foot of the base(s).
STEP 13A
Slide the Retainer Bar Cover (C) onto the Retainer Bar
(B) so the screw holes are on top of the retainer bar.
STEP 13B
Place the retainer bar plate on top of the retainer bar
cover, slide the screw through the plate and cover,
and screw into place. Before final tightening, ensure
retainer bar cover is pulled down completely over the
retainer bar.
STEP 14
Program remotes per instructions on Page 15.
STEP 15
Place the mattress(es) on the base(s).
NOTE: For more detailed instruction see the
Owner’s Guide. Be sure to give Owner’s Guide
and other materials to the new owner.
STEP 7
Carefully take base in the carton to the bedroom and
place next to where the customer wants it set up.
STEP 8
Carefully lift your Ergo System out of the shipping
carton, keeping the unit top side down. For safety
reasons, this should be performed by two (2) people.
STEP 9
Reinstall batteries in remote control, uncoil base
power cord, plug into power source, and perform
the Power Test Procedure to assure nothing was
damaged during trip.
STEP 10
Attach Ergo System Legs: Open the accessories box,
take out the 6 legs, and thread them in a clockwise
direction into the pre-threaded holes in the frame.
NOTE: Hand tighten the legs securely to the
frame. DO NOT over tighten. Make sure the legs
are screwed completely into the frame. Legs that
are not securely attached may become unsafe.
DO NOT unscrew a leg to compensate for an
uneven floor.
NOTE: Your Ergo System is equipped with
special locking casters. In order to prevent the
movement of this product, all six casters should
be in the locked position.
STEP 11
Carefully flip the Ergo System over to the “topside up”
position.
NOTE: Make sure to lift Ergo System off ground
before flipping over. DO NOT use legs as a
leverage point to ensure they do not break.
Delivery Procedure
COMPLETING HOME DELIVERY:
12
Customer Service: 1–800–979–1457
