Temptime Edge W-200, User Manual, Page: 22 / 29

External digital sensors
Temptime LoRaWan enabled solution EDGE W-200 module Page 22
4. Place the sensor / flat ribbon cable connector on the inside of the chamber in the same manner,
as shown here:
Figure 10 – Sensor inside refrigerator chamber (modules with external sensor only)
5. Your mounting kit includes a plastic holder that can be mounted using the provided magnet,
screws or Velcro®. Choose the method that is most appropriate for your situation and place the
EDGE module as described in section
3.6 Placing your EDGE module for best wireless
performance .
6.
For example:
Figure 11 – EDGE module mounted on the refrigerator door
7. Attach or coil the excess cable neatly.