Notices and safety
Temptime LoRaWan enabled solution
EDGE W-200 module
Page 2
1
Notices and safety
1.1.1
Safety instructions
IMPORTANT NOTE: Do not use this product for protection or as part of an automated emergency system or as for any other application that
involves protecting people and/or property. Customers and users of Temptime products are responsible for making sure that the product is fit
for the intended usage. Do not open the product casing and do not disassemble or modify internal components in any manner. Temptime
products do not contain any internal components that require user intervention or repair. If the device shows signs of improper operation,
disconnect it immediately from its power source and contact Temptime technical services.
1.1.2
Battery warning
This product contains a lithium battery. Make sure you respect polarity (+/-) when inserting batteries into Temptime devices.
Reversing polarity by inserting the batteries incorrectly can cause the product to heat up, and may lead to battery liquid
leakage. Use only batteries recommended by Temptime. Do not change battery types, such as rechargeable, alkaline and
magnesium, or use batteries of different brands, or even different types of batteries of the same brand. Incorrect batteries
may cause the device to heat up, and may result in a fire or battery liquid leakage. Never dispose of batteries in fire. Do not
charge regular batteries that are not specifically rechargeable. When the battery is low, or in case the battery-operated device in question
remains unused for a lengthy period of time, remove the battery from the device in order to avoid any risk of battery liquid leakage. Never
leave batteries within the reach of children. In case of a battery leak, avoid all contact with the liquid present on the batteries. Rinse with clear
water immediately in case the battery liquid comes into contact with the eyes, mouth or skin. Contact a doctor or emergency service
immediately. Battery liquid is corrosive and can damage vision, or cause blindness or chemical burns.
1.1.3
FCC statement
This paragraph pertains to 915 MHz EDGE™ wireless modules.
This device complies with part 15 of the FCC rules. Operation is
subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation: FCC Part 15 §107 - §109 - §207 - §247
(Ed 2008).
1.1.4
Canada — Industry Canada (IC)
This paragraph pertains to 915 MHz EDGE™ wireless modules.
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired operation of the device.
1.1.5
Conformity with European regulations
This paragraph pertains to 868 MHz EDGE wireless modules.
The CE mark on this product indicates that Temptime declares
that this product is compliant with Radio equipment and Telecommunications Terminal equipment (R&TTE) directive
1999/5/EC and the Low Voltage Directive (LVD) 2006/95/EC. The following standards were utilized to meet the essential
requirements of these directives: EN 301 489-3 v1.4.1 (02), EN 300 220-2 V2.1.2 (R&TTE) & EN 60950-1:2006/A11:2009 (LVD).
Caution:
Any changes or modifications not expressly approved by Temptime could void the user's authority to operate the equipment.
1.1.7
WEEE compliance
This wireless device complies with the essential requirements and other relevant provisions of the Waste Electrical and Electronic Equipment
Directive 2002/96/EC (WEEE Directive).
1.1.8
Environmental protection
Please respect local regulations concerning disposal of packaging, unused wireless devices and their accessories, and promote their recycling.