External Smart Sensors
Temptime LoRaWan enabled solution
EDGE W-200 module
Page 16
(Note: if you change the sensor on a functioning EDGE W-200 module, you must reconfigure the
module on the server-side using the EDGEConnect Web application.)
Figure 5 – Connecting your EDGE W-200 wireless module with an external sensor
This feature offers an effective way to handle sensors at calibration time
(depending on your standard operating procedure) without leaving your
equipment unattended. Simply have a calibrated sensor on-hand and swap it
with the one that needs calibration.
Insert the cable from your
module into the keyed plug
on the EDGE Smart Sensor
connector.