93
Sidekick
®
Plus Test Set
6. Use the up (
2
) and down (
8
) arrows to select the
modem parameter to change. Press the right (
6
)
key to change the selected parameter.
7. To make a change to the Standard (in ADSL mode)
or Modem Profile (in VDSL mode), press the right
(
6
) key to display the selection pop-up window.
Then use the center (
5
) key to check or uncheck
the highlighted profile. After the selections are
made, press the
O
(
Back)
key to save the selec-
tion and return to the Profile configuration view.
8. Configure the link termination by pressing the right
(
6
) key when “Termination” is highlighted. Select
either PTM or ATM from the pop-up window.
• For VPI, enter the virtual path identifier number.
• For VCI, enter the virtual circuit identifier number.
• For MUX, select LLCSNAP or VCMUX.
Note: VPI, VCI, and MUX settings are only shown if
the termination is set to ATM .
Summary of Contents for 1155-5003
Page 2: ......
