Cyclone User Manual
76
Projector-specific Mounting
All Cyclone enclosures are projector specific. Some
projectors require special mounts and/or exhaust
baffles.
Be sure to check for your projector in the
Projector-specific information below.
Christie D4K-40 RGB - Landscape
WARNING: This projector is HEAVY. You will need
at least four people or a mechanical lifting device
to install it in the enclosure. Do not attempt to lift
the projector if in any doubt about your lifting
capacity.
Tempest provides a special internal fan box to hang on
the right side of the projector, to ensure delivery of
adequate inlet airflow, required for landscape versions
only.
Install the Fan box using the M12 screws provided, into
the M12 threaded holes in the top of the projector, as
shown here.
All D4K40 enclosures are supplied with a power pigtail
with a 90-degree IEC309 female connector to mate to
the projector power inlet.
Note:
Locate the D4K40 projector feet in the round
openings provided in the projector tray. This is
important for optimal airflow.
M12 Screw
Fan Box
Threaded Hole
Power connector
D4K40 Fan Box
Fan Box
Power connector
Projector foot
location
