P a g e
|
5
TEMELSAN MAKİNA SAN. VE TİC. LTD. ŞTİ.
Akçaburgaz Mah. Muhsin Yazıcıoğlu Cad. No:55/1
Esenyurt
/ İstanbul / TÜRKİYE
TEL: +90 (212) 544-2518 FAX: +90 (212) 577-6557 www.temelsan.com [email protected]
AREAS OF USAGE
The butt-welding machine Temelsan KN40S-MN is used for low-alloyed and high-alloyed steel
bands and band saw blades or bi-metal or carbide tipped band saw blades.
The welding capacity for Band Saw Blades is from minimum 6x0.65mm up to a maximum 41
x1.10mm. The machine is capable to weld all kinds of band saw blades which are called
carbon, wood, bi-metal, CT Work on the electrical power supply is only to be done by
professional electrician.
The machine is a single piece and no need to be assembled.
The machine can be set-
up by the customer’s own staff if officially approved by Temelsan.
Please read the following sections thoroughly and carefully before the initial start-up and ensure
that you clearly understand it.
MAINTENANCE
In order to insure a safe operation on the machine and prevent accidents, the job listed in the
section “Servicing” must be carried out regularly. If the owner of machine is not in a position to
do that also must be arranged by an authorized service agent.
ISSUES
The machine must be switched off at once in case of any problem occurs during the operation
and then locked for not being restarted accidently by an unauthorized person.
The machine must be switched off in this case.
-
Unusual sounds, vibrations, smells
-
Unusual operations on the monitoring device
-
Increased temperatures or power consumption
-
Unusual reaction during the manual or automatic operation
-
Strange behavior and error messages displayed
WARNING!
Only suitably qualified personnel must service the machine!
EMERGENCY
