P a g e
|
16
TEMELSAN MAKİNA SAN. VE TİC. LTD. ŞTİ.
Akçaburgaz Mah. Muhsin Yazıcıoğlu Cad. No:55/1
Esenyurt
/ İstanbul / TÜRKİYE
TEL: +90 (212) 544-2518 FAX: +90 (212) 577-6557 www.temelsan.com [email protected]
CALIBRATION OF JAW SPACE
1.
Adjust the space of jaws by turning the hand wheel to 10mm (use a caliper) Hand Wheel
can be only turned when jaws are in Welding Ready Position!
2.
Adjust the space indicator also to 10mm by using a screwdriver Check the indicator
frequently.
BASIC SETTING OF STOPPERS AND SUPPORT PLATE LEVEL
Turn the CSL and CSR stoppers to find proper adjustment for band saw teeth size.
HAND WHEEL FOR JAW SPACING
SPACE INDICATOR
SCREW TO ADJUST INDICATOR
Adjust the space between the Jaws in Welding Ready
Position to a specific slot width and measure it proper.
Position on Space indicator should be same.
PLEASE CONTROL THIS FREQUENTLY!
MSR
OSR
OSL
MSL
JAW LEVEL
ADJUSTMENT HOLE
Outside Stopper Left
Center Stopper Left
Center Stopper Right
Outside Stopper Right
Middle Stopper Right
Middle Stopper Left
OSL
CSL
CSR
OSR
MSR
MSL
CSR
CSL
