Tema Telecomunicazioni AA-502 Technical Manual Download Page 36 | Manualshive

Page: 36 / 56

background image

TEMA TELECOMUNICAZIONI SRL

Doorphone AA-514

MAS-AA514-REV03EN

Page 36 of 56

8.5.7. CASE 7: connection between base unit and expansions

Here are some examples of compositions obtainable by the  various modules of the  AA-514 system. In addition to
the  required  connections  to  the  AA-514  base  system  between  a  module  and  another  one  (as  detailed  in  the
descriptions  and  examples  on  previous  pages),  for  the  backlight  of  the  AA-516R  expansion  legend  module  are
required other connections as indicated in the following table.

Pair AA-514 + AA-516P or AA-514 + AA-516K

Connect the two modules using the FC flat cable
supplied with the expansion module, power only the
base system with AL-39AL on TB4.

AA-514 + AA-516K + AA-516R

The cascade connections from the AA-516K  module to
the  next  AA-516R  modules  can  be  skipped  if  it  is  not
necessary  to  backlight  or  not  heat  the  area  of  the
legend of the modules

Power  the  only  base  system  with  AL-39AL  on  TB4.
Connect the base system with the keyboard expansion
using  the  FC  flat  cable  supplied  with  the  expansion
module. Then connect the terminal TB5 of the base AA-
514  with  the  terminal  TBE3  of  the  expansion  AA-516R
(see next page for details).

AA-514 + AA-516K + three AA-516R modules

Keep in mind the power consumption of all modules
that are going to be connected with the various enabled
functions (for example, backlight and anti condensatio n
when necessary).

Power  the  base  system  with  a  first  AL-39AL  on  TB4.
Connect the base system with the keyboard expansion
using  the  FC  flat  cable  supplied  with  the  expansion
module.

Power  the  first  expansion  with  a  second  power  supply
AL-39AL  on  TBE2.  Connect  from  the  first  AA-516R
expansion  the  other  expansions  in  cascade  using  the
TBE3 block terminals (see next page for details).

Please  note  the  presence  of  the  two  power  supplies
necessary  in  this  instance  to  divide  the  loads  on  the
basis  of  the  power  consumption  of  the  circuits  of  the
backlight and anti condensation of all the modules.

1.5A

1.5A

1.5A

1.5A

1.5A

«
...
34
35
36
37
38
...
»

Summary of Contents for AA-502

























































Reviews:

No comments

Related manuals for AA-502

Brand: Da-Lite Pages: 8

Brand: Dahua Pages: 28

Brand: Martin Audio Pages: 1

Brand: ICP DAS USA Pages: 156

Brand: National Instruments Pages: 18

Brand: MET Pages: 4

CENTRAL Omega HEC-12 PRO Prohibitor

Brand: Tyco Fire Product Pages: 4

Brand: W Audio Pages: 4

EASY CLEAR EQ-12-TH

Brand: Bunn Pages: 2

Brand: Pilz Pages: 36

SlimDoorPhone 1 button

Brand: Linkcom Pages: 22

Protege PRT-ENTR-17

Brand: ICT Pages: 56

Brand: JBL Pages: 32

Brand: Ricatech Pages: 64

Brand: Daewoo Pages: 21

WL-IC-BKMT-SIP-OV

Brand: Wahsega Labs Pages: 20

Brand: Blaupunkt Pages: 36

Brand: Ibiza sound Pages: 33

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands