To exit Program mode
When you are finished programming, hang up.
The program codes and options are summarized for quick reference in
Appendix B.
Command Dictionary
With this table, you can look up a command by its number, name, or page
number. The Description provides information explaining the basic use of
each command. In-depth explanations are provided in the text on the
indicated page.
There are two types of commands: systemwide and per-line. Command codes
00 through 09 and 60 through 64 are systemwide and can be entered with any
line selected and with the unit in programming mode. All other commands are
per-line-programmable features (command codes 11 and above); all
commands entered are for Line 1 until another line (2 through 4) is selected.
Appendix B provides a quick reference list of commands.
Command
Number
Command
Description
Page
Systemwide Commands
**99##
Use this command to enter programming mode.
28
00
Reset to defaults
Use this command to erase programming and return to the
original settings.
There is no default for this command.
28
01
Program Line 1
Enter this command to program Line 1. After you enter this
command, you can enter others to change how Line 1
operates.
There is no default for this command.
28
02
Program Line 2
Use this command to program Line 2.
There is no default for this command.
28
03
Program Line 3
Enter this command to program Line 3.
There is no default for this command.
28
04
Program Line 4
This command programs Line 4.
There is no default for this command.
28
Telephone Line Simulator 4A
Page 24
