Teltone TLS-4A User Manual Download

Page: 33 / 58

Command

Number

Command

Description

Page

Hunt Mode

Use this command to set how a “hunt group” or group of
phones sharing a single telephone number, responds when
the shared telephone number is dialed.

The default is ring all or “hunt mode”.

Attenuation

This command can be turned on or off. If it is turned on,
the TLS will lower the volume (i.e., loudness) of a call.

The default is disabled or no attenuation.

Forced Disconnect

Use this command to determine whether a line gets a
forced disconnect when the

other

line hangs up.

The default is forced disconnect on.

Dialtone Number

Use this command to program a number that will respond
with continuous dial tone until you hang up.

The default number is 83781 (TEST1).

Busy Tone Number

Use this command to program a number that will respond
with busy tone until you hang up.

The default number is 83782 (TEST2).

Reorder Tone
Number

Use this command to program a number that will respond
with reorder tone until you hang up.

The default number is 83783 (TEST3).

Ringback Tone
Number

Use this command to program a number that will respond
with ringback tone until you hang up.

The default number is 83784 (TEST4).

Silence Number

Use this command to program a number that will respond
with silence until you hang up.

The default number is 83785 (TEST5).

Clone Line X

Use this command to copy the programming from one line
to the line you are calling from. For example, if you enter
*90#1# from Line 2, the programming from Line 1 is
copied to Line 2.

There is no default for this command.

Programming Query

Use this command to find out how a particular command is
set. This command does

not

work with commands 00-04.

There is no default for this command.

Reference Manual

Chapter 6: Programming

40-400-00033, Rev.

Page 27

Summary of Contents for TLS-4A



























































Search results

Summary of Contents for TLS-4A

Reviews:

Related manuals for TLS-4A

Brands by name

Popular brands

Teltone TLS-4A, User Manual

Search results

Summary of Contents for TLS-4A

Reviews:

Related manuals for TLS-4A

Brands by name

Popular brands