42
43
Answering machine
Answering machine
Set Answer Delay
1. In standby mode, choose
Menu
and press
to select
ANSWER MACHINE
. Choose
Select
.
2. Press
to select
TAM SETTINGS
.
Choose
Select
.
3. Press
to select
ANSWER DELAY
.
Choose
Select
.
4.Choose
Select
and press
to select
the answer delay that you want. (2 Rings to
9 Rings or Time Saver).
5. Choose
Select
to confirm.
Set Recording Time of Incoming
Message
1. In standby mode, choose
Menu
and press
to select
ANSWER MACHINE
. Choose
Select
.
2. Press
to select
TAM SETTINGS
.
Choose
Select
.
3. Press
to select
RECORDING TIME
.
Choose
Select
.
4.Choose
Select
and press
to select
the recording time that you want. (60 Sec,
120 Sec, 180 Sec, or Unlimited).
5.Choose
Select
to confirm.
Answer and Record
You cannot delete a pre-recorded message. If you delete
your personal outgoing message the pre-recorded
outgoing message will be automatically reinstated as
your outgoing message.
Answer mode
Choose which outgoing message you want played to
callers.
Answer delay
Answer delay sets the number of times your Telstra
V950a will ring before the answering machine answers
your call and starts playing the outgoing message. You
can choose a Answer Delay setting from 2 to 9 rings or
Time Saver.
Time Saver
When you ring in to access your messages remotely, if
your answering machine is set to Time Saver and you
have new messages it will answer after 2 rings. If you
do not have any new messages, it will answer after 4
rings. This means you can hang up knowing you have
no new messages, saving you time and the cost of the
call.
Recording time
Set the maximum message length: 60, 120 or 180
seconds or unlimited.
Restore your outgoing message to
default
1. In standby mode, choose
Menu
and press
to select
ANSWER MACHINE
. Choose
Select
.
2. Press
to select
TAM SETTINGS
.
Choose
Select
.
3. Press
to select
OGM SETTINGS
.
Choose
Select
.
4. Press
to select
ANSWER & RECORD
or
ANSWER ONLY
. Choose
Select
.
5. Press
to select
DEFAULT
. Choose
Select
.
6.Press
OK
to confirm restoring to default
OGM.
Answer and Record
The pre-set Answer and Record outgoing message,
which allows your caller to leave a message, is
“Hello, your call cannot be taken at the moment, so please
leave your message after the tone”.
Your Answer and Record outgoing message can be
up to 1 minute long and will replace the pre-recorded
message.
Answer Only
The pre-set Answer Only outgoing message, where
callers hear an announcement but cannot leave a
message, is
“Hello, your call cannot be taken at the
moment and you cannot leave a message, so please call
later”.
When recording your Answer Only message, remember
to advise your caller that they will not be able to leave
a message. Your own Answer Only message can be
up to 1 minute long and will replace the pre-recorded
message. To reinstate the pre-recorded messages,
restore your outgoing message to default.
When your answering machine memory is full and
the answer mode is in Answer & Record, the answer
mode will change to Answer Only automatically. It will
change back to Answer & Record mode automatically
after some messages have been deleted.
Answer Settings
1. In standby mode, choose
Menu
and press
to select
ANSWER MACHINE
. Choose
Select
.
2. Press
to select
TAM SETTINGS
.
Choose
Select
.
3. Press
to select
ANSWER MODE
. Choose
Select
.
4. Press
to select the outgoing
message type,
ANSWER & RECORD
or
ANSWER
ONLY
.
5. Choose
Select
to confirm.
1
Summary of Contents for V950a
Page 32: ......
