30
31
Settings
Settings
4. Press
to select the ringer volume
that you want.
5. Choose
Select
to confirm.
Choose from 5 base melodies. There are 5 volume levels
including Volume Off.
Change Recall (Flash) Time
The default Recall Time is 100msec.
1. In standby mode, choose
Menu
and press
to select
BASE SETTINGS
. Choose
Select
.
2. Press
to select
FLASH TIME
. Choose
Select
.
3. Press
to select the recall (flash)
time that you want (Short, Medium, Long)
4. Choose
Select
to confirm.
The recall time should not normally need to be
adjusted from the default 100msec unless you are
advised to do so.
The Recall button is used to access certain Telstra
Network Features such as Call Waiting.
System PIN
1. In standby mode, choose
Menu
and press
to select
BASE SETTINGS
. Choose
Select
.
2. Press
to select
MODIFY PIN
. Choose
Select
.
3. You will be prompted to enter the 4-digit
system PIN.
4. Enter the old system PIN and choose
OK
.
(Default 4-digit system PIN is 0000)
5. Enter the new system PIN and choose
OK
.
6. Re-enter the new system PIN and choose
OK
.
7. Choose
OK
to confirm.
The System PIN is used when changing certain settings
and registration / deregistration.
The default setting is 0000. You can change this to your
own preferred 4-digit number.
If you make a mistake, choose
Clear
to delete digits.
Ringer Volume
1. In standby mode, choose
Menu
and press
to select
HS SETTINGS
. Choose
Select
.
2. Press
to select
RING SETUP
. Choose
Select
.
3. Press
to select
RING VOLUME
. Choose
Select
.
4. Press
to select the ringer volume
that you want. (Level 1 to Level 5 or Ringer
Off)
5. Choose
OK
to confirm.
You can set different ringtones for external calls and
internal calls.
Choose from 10 ringer melodies and 5 standard tones.
The handset also has 5 ringer volume settings plus Off.
You can also switch the handset ringer off by pressing
and holding
.
Alert Tones
1. In standby mode, choose
Menu
and press
to select
HS SETTINGS
. Choose
Select
.
2. Press
to select
TONE SETUP
. Choose
Select
.
3. Press
to select
KEY TONE / BATTERY
LOW / OUT OF RANGE
. Choose
Select
.
4. Press
to turn these tones on or off.
5. Choose
Select
to confirm.
Your handset can give alert tones when you are going
out of range and when the battery is low.
It can also beep every time you press a button.
You can switch these tones on or off individually as set
out above.
Base settings
Ringer
1. In standby mode, choose
Menu
and press
to select
BASE SETTINGS
. Choose
Select
.
2. Press
to select
RING SETUP
. Choose
Select
.
3. Press
to select
RING MELODY
. Choose
Select
.
4. Press
to select the ringer melody
that you want.
5. Choose
Select
to confirm.
Ringer Volume
1. In standby mode, choose
Menu
and press
to select
BASE SETTINGS
. Choose
Select
.
2. Press
to select
RING SETUP
. Choose
Select
.
3. Press
to select
RING VOLUME
. Choose
Select
.
1
Summary of Contents for V950a
Page 32: ......
