background image

38

39

Telstra Network Features

Telstra Network Features

To check or turn Call Waiting on/off

1. Press 

 .

2. Press 

 to select 

C. W. ON, C. W. OFF OR 

CHK CALL WAIT

3. Choose 

Select

 to call. Follow the spoken 

instructions, or listen for confirmation/ 
status of your instructions.

To use Call Return

1. Press 

.

2. Press 

 to select 

CALL RETURN

3. Choose 

Select

 to call. Listen for voice 

instructions.

To check Call Forward Immediate

1. Press 

.

2. Press 

 to select 

CHK CF IMM

.

3. Choose 

Select

 to call. Listen for 

confirmation/status of your instructions.

To check Call Forward on Busy

1. Press 

.

2. Press 

 to select 

CHK CF BUSY

.

3. Choose 

Select

 to call. Listen for 

confirmation/status of your instructions.

To check Call Forward on No Answer

1. Press 

.

2. Press 

 to select 

CHK CF NO ANS

.

3. Choose 

Select

 to call. Listen for 

confirmation/status of your instructions.

To turn Call Back off

If you have activated the Call Back feature 
using Recall * 3 7 # after you hear busy tone, 
you can turn the feature off as follows:

1. Press 

.

2. Press 

 to select 

C.B. OFF

3. Choose 

Select

 to call. Listen for 

confirmation/status of your instructions.

To call the TecHelp Helpdesk

1. Press 

.

2. Press 

 to select 

TECHELP LINE

3. Choose 

Select

 to call. Listen for 

confirmation/status of your instructions.

Call Waiting

Call Waiting tells you if a new caller is trying 
to contact you when you are already on 
the phone. A discreet tone alerts you to the 
new caller, so you can answer your second 
incoming call by putting the first caller on 
hold. 

1. Press 

and hold

 the 

 button. 

Your first caller is put on hold and you can 
talk to your second caller. 

2. To revert back to the original caller, press 

and hold

 the 

 button again. 

3-Way Chat

This service is available on most lines ready 
for you to use! If you are already on a call, 
you can add another person and then have a 
3-Way Chat.

To put existing call on hold and make a 
new call then to 3-Way Chat 

1. Press   

2. Dial the second phone number 

3. Long press 

 

To split a 3-Way Chat or switch between 
callers 

1. Long press 

 

Pre-stored Telstra Network Features:

Feat. Assist.  

(To call Feature Assist)

C.W. On 

(Turn Call Waiting On)

C.W. Off 

(Turn Call Waiting Off)

Chk Call Wait 

(To check Call Waiting status)

Call Return 

(To use Call Return)

Chk CF Imm. 

(To check Call Forward Immediate)

Chk CF Busy 

(To check Call Forward Busy)

Chk CF No Ans  (To check Call forward No Answer)

C.B. Off  

(To turn Call Back off)

TecHelp Line 

(To call TecHelp Line)

To use Feature Assistant

1. Press 

 to select 

FEAT. ASSIST

.

2. Choose 

Select

 to call. Listen for voice 

instructions.

1

Summary of Contents for V950a


































Reviews: