manualshive.com logo in svg

Telstra Access 200, User Manual

Share
Download
Telstra Access 200 User Manual Download Page 8

8

DESCRIPTION

Your Access 200 allows you to:
• In future, when available from the Telstra

network, view the telephone number of an

incoming call when you are already on the

telephone (Calling Number Display on Call

Waiting). The visual indicators and a tone in

your telephone handset will inform you when

a new call is waiting.

The Access 200 gives you the telephone

number of a new caller provided the  number is

not blocked and helps you to decide

whether to switch between the two calls or to

ignore the incoming call. In either case, the

telephone number is stored in the call log.

• In future, when available from the Telstra

network, see if you have received a message in

your voice mail box. If you have a Voice Mail

Service, the Access 200 displays the 

*

 icon

to inform you that a message is recorded in

your voice mail box.  A short time after you

have listened to your messages, the Voice Mail

Service sends a signal to your Access 200 to

automatically turn off the 

*

 icon.

a200ug.p65

3/7/01, 11:08 AM

8

Summary of Contents for Access 200

























































Reviews:

No comments

Brands by name

Popular brands

Load more brands