Telstra Access 200 User Manual Download Page 50

Page: 50 / 56

5 0

USING NETWORK SERVICES

Modifying the Services List

You can modify the network services to suit your

needs.
1. Press [SERV/MENU] to access the list of

available services. For example, Call Block,

Call Forward ON, Call Forward OFF, Call Wait

ON, Call Wait OFF, Call Back.

2. Press [

] to scroll to the service to be

modified, then press ENTER.

3. Press [OK] to select the modify option.

4. Enter the required network service code then

press [OK].

5. Modify the name of the service, then press

[OK].

If the Error Beep has been set ON the telephone

will beep to warn you that you are trying to use a

feature that is not currently available.
1. You are trying to set an invalid time or date

setting.

2. You are trying to use the [

] or [

] keys

when you have already reached the top or

the bottom of the entry list.

3. You are trying to use MOVE or COPY

functions to transfer an entry to an invalid list or

to one which is already full.

SERV/MENU

ENTER

NOTEPAD

DIAL

a200ug.p65

3/7/01, 11:11 AM

Summary of Contents for Access 200

























































Search results

Summary of Contents for Access 200

Reviews:

Brands by name

Popular brands

Telstra Access 200, User Manual

Search results

Summary of Contents for Access 200

Reviews:

Brands by name

Popular brands