manualshive.com logo in svg

Telstra Access 200, User Manual

Share
Download
Telstra Access 200 User Manual Download Page 30

3 0

Setting Call List Memory:

Sets the Callers List to log either ‘names and

numbers’ or ‘number only’. The default is Name

and Number and sets the maximum number of

entries to 25. The selection of NUMBER ONLY

automatically sets the maximum number of entries

to 50.
Press and hold the [SERV/MENU] key down for 2

seconds until:
‘SETTINGS’
‘DATE AND TIME’, press [t] key to select next

item until:
‘SETTINGS’
‘CALL LIST MEMORY’
appears on the display.  Press [t] and [s] keys to

choose the setting required. Choose between

‘NAME AND NUMBER’ or ‘NUMBER ONLY’.

Press [OK] when all changes are completed

Note:

If you change the current setting , all the entries

currently in the Caller List are deleted.

Setting Error Beep:

Switches the beep function ON (default) or OFF.

When this function is ON, a short beep sounds if

you press a key that cannot be used in certain

situations.
The error beep will only work if the handset is on

the hook.

OK

DIAL

SERV/MENU

PERSONALISING YOUR PHONE

a200ug.p65

3/7/01, 11:10 AM

30

Summary of Contents for Access 200

























































Reviews:

No comments

Brands by name

Popular brands

Load more brands