manualshive.com logo in svg

Telstra Access 200, User Manual

Share
Download
Telstra Access 200 User Manual Download Page 51

5 1

Message

Reason

'--------------------'

The call is from overseas.

'UNAVAILABLE'

The call is from a payphone. (PAYPHONE may be

displayed.)

'--------------------'

This tells you that the call is either:

'PRIVATE'

1. A silent line caller.

2. A caller who has chosen to Block their number.

3. An older type of telephone exchange (ie not

digital.)

4. A non Telstra Service.

5. An AMPS mobile service

'0396637698'

Display of the callers telephone Number Only

'--------------'

sent by the network where Name is not available.

'0396637698'

Display of the callers telephone Number and

'JOHN SMITH'

Name of a call you are receiving or have just

missed. When available.

'DATA ERROR'

During data transmission, a break in

communications has occurred. It may be that you

took the handset off hook before the second ring.

'BOTTOM'

Indicates that the oldest message has been

'01 IN LIST'

reached and gives the number of calls in the log.

In this examples: one call is in the log.

'TOP'

Indicates that the most recent message has been

'06 IN LIST'

reached and gives the number of calls in the log.

In this examples: six calls are in the log.

'NO CALLS'

No calls are stored in the log.

EXTENSION IN USE

Someone is using a parallel telephone or your

telephone is not plugged into the telephone

line socket.

MESSAGES AND ERROR BEEPS

Screen Messages:

When NAME/NUM has been selected, the

following screen messages may be seen:

a200ug.p65

3/7/01, 11:11 AM

51

Summary of Contents for Access 200

























































Reviews:

No comments

Brands by name

Popular brands

Load more brands