manualshive.com logo in svg

Telstra Access 200, User Manual

Share
Download
Telstra Access 200 User Manual Download Page 26

2 6

PERSONALISING YOUR PHONE

The Settings Menu

Your telephone is ready to use as soon as it is

connected and installed as explained at the

beginning of this User Guide. However, to obtain

the most out of the telephone some features will

need setting (e.g. the date and time) and other

features may need adjusting (e.g. the ringer).

All of these features are accessible through the

Settings Menu.

Note:

The Settings menu is not available during calls

1.

Press and Hold [SERV/MENU] for 2 seconds

to enter the Setting Menu.

2.

Press [

‚

] to scroll to the option you want then

press [OK] to select it.  The display shows the

options current setting if it has one.

3.

Press [



] or [

‚

] to view the possible settings

for the current option, then press [OK] to select

the setting you want.
This sets the option and returns you to the main

menu. Some options like ‘DATE’ and ‘TIME’

require you to enter a value using the keypad.

4.

To exit the Settings menu press
[SERV/MENU].

Power Failure

Your settings are not lost in the event of a power

failure. Only the notepad and redial numbers are

lost.

OK

DIAL

SERV/MENU

SERV/MENU

OK

DIAL

SERV/MENU

DATE AND TIME
SELECT RING TYPE

SET RING VOLUME
SET CALL TIMER
CLR MESSAGE ICON
CALL LIST MODE
CALL LIST MEMORY
SET ERROR BEEP

a200ug.p65

3/7/01, 11:09 AM

26

Summary of Contents for Access 200

























































Reviews:

No comments

Brands by name

Popular brands

Load more brands