Telpar MTP-1530II Receipt Thermal Printer User Manual
MTP-1530II User Manual (Revision 20120510)
Page 32
Set Print mode
ESC !
+n
1B 21
+n
Set Print mode. See Section 4.5.1 - Set
Print Mode. See ESC M, ESC E, ESC -,
GS!.
Set absolute
print position
ESC $ +n
+m
1B 24 n m
Current print position is set to (n + m x
256) x 0.125 mm from the beginning of
the line. See ESC \, GS $, GS\. See
Page mode.
Select Bit
Image mode
ESC
+m
+n
1
+n
2
+d1
∼
d
n
1B 2A
+m
+n
1
+n
2
(data)
Set Bit Image mode. See 4.5.2. - Set Bit
Image Mode
Turn underline
mode on/off
ESC - +n
1B 2D +n
n=0 (00 or 30 hex) Turn underline off.
n=1 (01 or 31 hex) Turn on 1 dot line
high underline. n=2 (02 or 32 hex) Turn
on 2 dot line high underline. See ESC !.
Set default line
spacing
ESC 2
1B 32
Set 3.75 mm line spacing (30 dot lines).
See ESC 3.
Set Line feed
pitch
ESC 3
+n
1B 33
+n
Set single line spacing to n dot lines (n x
0.125mm). Set independently in Page
and Normal mode. Default = 30. See
ESC 2.
Printer reset
ESC @
1B 40
Resets the printer to the mode it was in
when power was turned on. Clears the
data in the print buffer but does not the
data in the receive buffer. The DIP
switches and MEMORY switches are not
rechecked. The MACRO definition is not
cleared.
Set Horizontal
Tab positions
ESC D
+d1
∼
d
n
NUL
1B 44
(DATA) 00
Set from 1 to 32 tab positions. Data
values range from 1 to 255 in ascending
order. If a data value is less than the
previous data value, this command is
terminated. NUL terminates this
command when less than 32 TAB
positions are being set. ESC D NUL
clears all tab positions. Default is every
8 columns.
Turn
emphasized
mode on/off
ESC E +n
1b 45 +n
LSB = 0 Turn emphasized mode off.
LSB = 1 Turn emphasized mode on. See
ESC !.
Turn double-
strike mode
on/off
ESC G +n
1B 47 +n
LSB = 0 Turn double strike mode off.
LSB = 1 Turn double strike mode on.
Printout is the same as emphasized.
See ESC E.
