Telpar MTP-1530II Receipt Thermal Printer User Manual
MTP-1530II User Manual (Revision 20120510)
Page 25
Memory Switch 8
Position
State
Function
Default
Both
OFF
Non-divided energization mode
1 = ON
2 = OFF
Two part energization mode
1 and 2
1 = ON or
OFF
2 = ON
Four-part energization mode
Both
OFF (0)
ON
Enable backwards paper feeding
3
OFF
Disable backwards paper feeding
OFF (0)
ON
Autocutter is NOT installed
4
OFF
Autocutter is installed
OFF (0)
ON
Discards receive data when printer is offline
5
OFF
Keeps receive data when printer is offline
OFF (0)
ON
Backwards paper feeding amount = 88 steps
6
OFF
Backwards paper feeding amount = 108 steps
OFF (0)
ON
Enable test print when paper is loaded
7
OFF
Disable test print when paper is loaded
OFF (0)
ON
Does NOT initialize for Black Mark position when power is turned on
8
OFF
Initializes for Black Mark position when power is turned on
OFF (0)
Note:
Not all printer mechanisms allow reverse paper feeding. If reverse
feeding is allowed, after cutting the paper with a GS V command,
paper feeds backwards. The print starting position adjustment
with GS ( F can be set to the backward direction relative to the
cutting position. In this case, the maximum backward feed length
is 14 mm (112 * 0.125mm).
