Telpar MTP-1530II Receipt Thermal Printer User Manual
MTP-1530II User Manual (Revision 20120510)
Page 49
within each data byte, a “1” represents a dot position to be printed and a
“0” represents a dot position not to be printed. The first x1+x2*256 data
bytes are printed as the first raster line. The next x1+x2*256 data bytes
are printed as the second raster line. This sequence continues until all
y1+y2*256 dot lines defined have been printed. After printing the raster
bit image, the printer returns to normal mode.
4.5.4
Set and Process Graphics Data
GS (L pL pH m fn [parameter]
1D 28 4C pL pH m fn [parameters]
GS 8 L p1 p2 p3 p4 m fn [parameter]
1D 38 4C p1 p2 p3 p4 m fn [parameters]
In the description below, only the
GS (L
command is used for
explanation. Please note that
GS (L
and
GS 8 L
have the same
function, however, if the [parameters] in the Format column in the table
below exceed 65,533 bytes, then the
GS 8 L
command must be used.
Command
Parameters
Structure
Maximum Value
GS (L
pL, pH
2 bytes
65,535
GS 8 L
P1, p2, p3, p4
4 bytes
4,294,967,295
Definitions
:
•
pL
and
pH
specify (pL + pH X 256) as the number of bytes after
pH (m, fn, and [parameters])
•
fn
specifies the function
•
[parameters]
specify the process of each function
fn
Format
Function
No
.
Function Name
0, 48
GS (L pL pH m fn
48
Transmit the NV graphics memory capacity
2, 50
GS (L pL pH m fn
50
Print graphics data in the print buffer
3, 51
GS (L pL pH m fn
51
Transmit the remaining capacity of the NV graphics memory
64
GS (L pL pH m fn d1 d2
64
Transmit the key code list for defined NV graphics
65
GS (L pL pH m fn d1 d2 d3
65
Delete all NV graphics data
66
GS (L pL pH m fn kc1 kc2
66
Delete the specified NV graphics data
67
GS (L pL pH m fn a kc1 kc2 b
xL xH yL yH [c d1…dk]1…[c
d1…dk]b
67
Define the NV graphics data (raster format)
69
GS (L pL pH m fn kc1 kc2 x y
69
Print the specified NV graphics data
112
GS (L pL pH m fn a bx by c
xL xH yL yH d1…dk
112
Store the graphics data in the print buffer (raster format)
