DeTaIleD COnfIGuraTIOn anD referenCe |
33
4.2.4 Show Setup
Hold previous when select Line
If a call is in progress (line selected) and another line begins to ring, selecting the second line can either end
the previous call or place the previous call on hold. The option allows you to configure the hold function for
clients that are set as Producer, Talent, or both.
Enable auto-answer line to hold
Enables the auto answer feature. Non-priority ringing lines are automatically answered and put on hold.
Fix locked lines to hybrid
When enabled, you will not be able to transfer a line that is locked on air to another hybrid. If not enabled,
even if a line is locked, the line can be switched to the other hybrid.
Block priority lines from next queue
When turned on, priority lines will not be selected when ‘next’ button is pressed. As a side effect, ringing
priority lines will not trigger the ‘RingOutNorm’ GPIO bit
Line Sharing
Line states can be shared with another iQ6 to enable studio “hot line” sharing between studios. This is
generally a special DID number that only “the engineer” or GM or other would use. If using POTS, you can
plug this line into two iQ6 units and configure this option so that both units know when the line is in use by
the other studio. Both iQ6 units require the opposing unit’s IP address to be assigned in the IP field.
