background image

GPONDoctor 9500 
User manual

 

 

 
 

200080279-00 GPON DOCTOR 9500 user manual EN v0 WEB

 

 

29  

 

  

 

 
There are some controls for the Graphics: 

Play  

: to continue (after pause) or re-start (after stop) the bandwidth graphical 

representation. 

Pause : 

to pause the graphical representation. 

Stop : 

to stop and clear the graphical representation. 

Configuration : 

to configure the time scale and the graphic refresh period. This control 

is common to both graphics. 

Export CSV 

 to export the charted information (points) to a CSV (comma-separated 

values) file. 

 

By positioning the mouse over the graphic area and clicking the right button other actions 
are available: 
 

 

Copy:  to copy the graphic as an image into the clipboard for later insertion in a 
document. 

 

Save Image As: to save the graphic as an image file. 

 

Page Setup: to setup page (margins, paper and orientation) before printing. 

 

Print: to print the graphic. 

 

Show Point Values: to enable/disable the presentation of the graphic coordinate 
values. After enabling, move the mouse over the graphic line to see the point 
values. 

Summary of Contents for GPONDoctor 9500










































































































Reviews: