TELNET GPONDoctor 9500, User Manual

Page: 27 / 105

GPONDoctor 9500
User manual
200080279-00 GPON DOCTOR 9500 user manual EN v0 WEB
27
Finally, there is one indicator associated to the capture process:

RT: Real Time capture. This indicator turns green when a real time capture is
running. In any other case, it is grey.
3.2 Real Time PON Status
The RT PON Status tab is always present at any stage of the workflow process. In this tab
the PON topology is shown and the bandwidth of the GEM ports is measured in real time
without the need to start any capture. GEM ports for user traffic extraction can also be
easily selected from this view. All these features are described in detail in the following
subsections.
3.2.1
Real time PON topology
Once GPON Doctor™ is connected to the PON and without needing to start a capture, the
topology is built and presented in the left side of the RT PON Status tab. Specifically two
GEM port lists are displayed: one that shows the GEM ports discovered in downstream
direction and another one with the GEM ports discovered in upstream together with their
T-CONT and ONT assignment. A GEM port is added to the corresponding list if the OLT or
ONT has sent traffic through it at some time while the analyzer has been connected to the
PON. It must be noted that the upstream information will be shown only if the analyzer is
synchronized with the upstream link, that is, when the Sync status indicator is green. An
example is shown below.