TELNET GPONDoctor 9500, User Manual, Page: 32 / 105

GPONDoctor 9500
User manual
200080279-00 GPON DOCTOR 9500 user manual EN v0 WEB
32
3.3 How to Capture
There are four different capture methods:
With the
Normal Store and Display capture
the user starts and stops
the capture using the control keys, and captured packets are only shown
in the Capture and OMCI tabs once the capture is stopped. Only packets
containing Serial Number Requests, Range Requests, PLOAM messages
and OMCI messages are captured and shown in the Packet List pane of the
Capture tab, regardless of the capture configuration settings.
With the Real Time capture the user starts and stops the capture using the
control keys, and captured packets are shown in the Capture tab while the
capture is running. Only packets containing Serial Number Requests, Range
Requests, PLOAM messages and OMCI messages are shown in the Packet
List pane of the Capture tab, regardless of the capture configuration
settings.
With the Real Time capture the user starts and stops the capture using the
control keys, and caWith the Time controlled Store and Display capture the
user starts the capture using the control key and sets the duration of the
capture to the desired capture time. Captured packets are only shown in the
Capture and OMCI tabs once the capture is stopped. For every downstream
frame and for every upstream burst, GPON Doctor™ displays a packet in the
Packet List pane of the Capture tab. The information shown for these
packets depends on the capture configuration settings.
3.3.1
Normal Store and Display capture
3.3.1.1 Configuring a Normal Store and Display capture
During a Normal Store and Display capture GPON Doctor™ captures packets carrying
PLOAM messages, OMCI messages and Bandwidth Maps corresponding to Serial Number
Requests and Range Requests only. The information to be captured is therefore pre-
established, and no configuration is required.
3.3.1.2
Running a Normal Store and Display capture
To start a Normal Store and Display capture select the Start Normal Capture option in the
Capture menu: