TELNET GPONDoctor 9500, User Manual

Page: 62 / 105

GPONDoctor 9500
User manual
200080279-00 GPON DOCTOR 9500 user manual EN v0 WEB
62
PON Parameters section
Summary of the general upstream configuration options published by the OLT to the
ONTs through Upstream Overhead and Extended Burst Length PLOAM messages.
Figure 32 PON Parameters Detail

Information Listed
o
Default ONT emitting upstream signal power
o
OAM parameters:

Guard Bits between bursts

Preamble configuration
o
Use of Pre-equalization delay before ranging and its value
o
Use of deprecated Serial Number masks procedure.

Interactive behaviour: None
ONT State Section

Information Listed: This section shows a summary of the general information of
the selected ONT on the PON Topology box:
o
ONT-ID Serial Number (If detected), FEC used in upstream transmission,
presence of RDI (Remote Defect Indication declared by the ONU), power
level declared/configured on upstream transmission.
o
Timing: Equalization value assigned by the OLT (in bits), Random ONT
delay declared on answer to serial number request (if detected)
o
Use of password and password value
o
Last Frame Counter for the LAST AES key assigned. AES encryption
o
keys sent by the ONT
o
GTC State machine status
o
Presence of LOSi or LOFi