TELNET GPONDoctor 9500, User Manual

Page: 28 / 105

GPONDoctor 9500
User manual
200080279-00 GPON DOCTOR 9500 user manual EN v0 WEB
28
Each downstream/upstream GEM port has an activity indicator. These indicators turn
green when traffic is being sent through the GEM port. When no activity is detected, the
indicators are in grey colour.
There are three controls associated to the real time PON topology:

Clear : it clears the current topology and starts building it again.

Stop : it stops updating the PON topology. The topology update status
indicator turns grey and the GEM port lists are not updated.

Play : it restarts updating the PON topology. The topology update status
indicator turns green and the GEM port lists are updated again, but without
clearing the last discovered values.
3.2.2
GEM port bandwidth measurements
Once the GEM port lists are built, a GEM port in each direction can be selected to measure
the bandwidth it is consuming. The measured bandwidths are displayed in real time on
the graphics of the right side of the RT PON Status tab. The top graphic is associated to
the selected GEM port in downstream direction, while the bottom one is for the selected
port in upstream. In this graphic it is also displayed the bandwidth assigned to the T-
CONT the GEM port belongs to, so that consumed and assigned bandwidths can be
compared.
Follow the next steps to see the bandwidth consumed by a downstream/upstream GEM
port:
1. Select one port from the list of discovered downstream/upstream GEM ports by
clicking with the mouse over it.
2. Click on the associated “graphic” icon
3. The graphic showing the bandwidth consumed by this port is generated. The
maximum, minimum and average values are also calculated.