8
2.4.3 Setting the reminders
Four voice messages can be recorded, each 10 seconds long, which are played at the
given times of day. The reminders can be configured to be played within the 0-24
interval, with daily repetition.
Recording a reminder
Steps of reminder recording:
1) Press the Settings
key continuously for at least 5 seconds, then “
PASS
”
is displayed on the digital display
2) Enter the user password using the 1-4 function keys (the password is: 1111)
3)
The “MEM” LED becomes lit
4) The reminders can be stored by assigning them to the 1-4 function keys.
The LED found above each function key is lit if there is already a reminder
assigned to the given key
5) Keep pressed for 3 seconds the function key (1-4) you wish to assign the
reminder to. The LED above the given (1-4) key flashes green to indicate to
which section the setting is in progress, while the “MEM” LED is lit red
6) Say the message after the beep, as close as possible to the front of the
device. After the next beep the module replays the recorded message
automatically
7) Keep the Settings
key pressed for 3 seconds. The time of reminder
playing can be adjusted using the +/-
keys, digit by digit. Switching
to the next digit can be done using the Settings key
, e.g.: to set the time
to 12:30, do the following:
0._._._
1x
= 1_._._
2x
= 12._._
3x
=
12.3._
= 12.30
8) By pressing the Settings key
again, the modifications are saved and
saving is confirmed by a voice message
9) If you wish to set further reminders, repeat the above process from step 5
10) When finished, press Cancel
key to exit the programming mode. The
„MEM” LED remains lit continuously to indicate that there are reminders set.
If you wish to modify only the time of a reminder, then after step 3 press the 1-4 function
key to which the reminder to be modified is assigned. After this the device plays the
given reminder, then continue the setting from step 7. The LED above the given (1-4)
key flashes green to indicate to which section the setting is in progress.
