6
2.3 Digital display
Normally the display shows the clock.
The device can display status information by pressing the Settings
key shortly.
These status information are the following:
GSM signal:
GS 0-99
(indicates the signal strength in percentage from 1 to 99)
SIM status:
SI 0-1
(0=no SIM inserted, 1=SIM inserted)
You can switch between the status information with the Settings
key. To return to
clock display, press Cancel
key. If no key is pressed for more than 10 seconds, the
display returns automatically.
When there is a power loss and the device operates from its internal battery, the display
is automatically turned off with 30 seconds after power loss to minimize power
consumption. In this case the display can be turned on for 30 seconds by pressing
Cancel
key.
2.4 Configurable options in the easyAID unit
The following options can be configured in the easyAID module:
Clock setting
Phone number setting
Reminder settings
2.4.1 Setting the clock
To set the clock, keep Settings
key pressed continuously and adjust the hours and
minutes value by pressing the
keys intermittently. The
key increases the
hours while the
key increases the minutes. Setting the date is not possible on the
unit’s interface, this can only be done using the programming software.
The date setting does not affect the operation of the device, it only affects the event list
records, which means if the date is not set, the date of the event records in the event list
will not be actual.
Attention!
The device does not control daylight saving, therefore the clock has to be
adjusted in this period.
