Internet Phone User Manual
66
y
Press ‘OK’ button to proceed to the
next step.
y
Press ‘Cancel’ key to move to the
upper menu.
①
Prefer
This menu is to select the preferred codec used in Fast start mode.
STEP 1
Select ‘1: Pre [G723]’ to set the preferred codes.
y
Press ‘OK’ button to proceed to the
next step.
y
Press ‘Cancel’ key to move to the
upper menu.
STEP 2
Please use the number key to select your preferred codec. There will be a
display to ask if you will apply the new setting. Select ‘Yes’ to apply the new setting,
and you can see the preferred codec changed on LCD.
y
Press ‘OK’ button to proceed to the
next step.
y
Press ‘Cancel’ key to move to the
upper menu.
②
Jitter Delay
Jitter is generally understood as the interpacket delay variance; that is, the difference
<Call Setup>
1: Service
2 : Codec
<Codec>
1: Pre [G723]
2: Jitter Delay
1. G711a 2.G711m
3. G723 4. G729
Preferred :[ 3]
Summary of Contents for 3200 series
