Internet Phone User Manual
31
STEP 2
Select ‘4: Setup’ in main menu.
STEP 3
Enter the password for user authentication.
STEP 4 Select ‘2: Network’. Use ‘1: Auto Detect’ menu only when you can’t
assure which network you are using.
Use navigation key to select the menu,
or just press the menu number.
Press ‘Cancel’ key to move to the upper
menu.
①
Automatic Network Detection
STEP 1
Select ‘1: NetDetect’.
y
Use navigation key to select the
menu, or just press the menu
number.
y
Press ‘Cancel’ key to move to the
upper menu.
STEP 2 The following message will appear. If you select ‘YES’, the Internet
Phone will examine the current network. In case of Cable modems, the setup will be
applied after rebooting. In case of PPPoE user, the message that asks ID and
password will appear. For example, the PPPoE user can see the following display. In
other case, please refer to the message that appears on the LCD.
<Auto Detect>
1: Net Detect
2: MAC Clone
<NETWORK>
1:Auto Detect
2:Mode Select
Summary of Contents for 3200 series
