Internet Phone User Manual
63
⑤
Default GW
This menu can be useful when the user uses Gateway mode, which means the user
uses Gateway instead of Gatekeeper for call routing. In Gateway mode, all the dialed
call will be routed through the default Gateway directly. If you select Default
Gateway disable, this mode will not work.
STEP 1
Select ‘5: Dft GW[Dis] in the menu selection.
y
Press ‘OK’ button or press the menu
number to select the menu
y
Press ‘Cancel’ key to move to the
upper menu.
STEP 2 Select ‘1: Enable’ to have the Dft Gateway enabled, or ‘2: Disable’ to
have the Dft Gateway disabled. If you select ‘1: Enable’, there will be a display to
ask to input the Gateway IP address into the input line. For your information, if you
select ‘2: Disable’, no need to input any other information.
y
Press ‘OK’ button or press the menu
number to select the menu
y
Press ‘Cancel’ key to move to the
upper menu.
STEP 3 Enter the default Gateway IP address into the input line. Please use ‘*’
key to input ‘.’ into the input line.
<Service]
4: Phone No
5: Dft GW
<DefaultGW[En]
1: Enable
2: Disable
Summary of Contents for 3200 series
