56050301 – Rev B
7
© 2017 Telguard
G
ETTING
R
EADY
The Telguard can only be activated when all the necessary accounting information has been entered
into the customer database located at the TCC (i.e. the unit has been registered). The database
includes information about the customer account, unit location, and system test plan information.
D
EALER
A
CCOUNT
E
STABLISHMENT
A Dealer Account must be established prior to registration of any Telguard unit. This can be
accomplished by visiting
www.telguard.com
and completing the necessary information under “Dealer
Signup”. This is a one-time event and an acknowledgment from Telguard Customer Service will
include a Dealer Account Number that will be used for all Telguard Digital registrations. Telguards
are available for registration and activation once the Dealer Account has been established.
P
RE
-I
NSTALLATION
C
HECKLIST
Before attempting to connect Telguard to the host alarm panel, please note the following:
Be sure you have all the proper parts before you go to the job site. The following items are shipped
with each Telguard:
Telguard Cellular Communicator
UL Listed plug-in transformer.
Cellular Antenna.
7-foot RJ45 plug to plug cord
Pluggable screw terminal blocks (2,3 & 6 position)
Quick Install Guide
Registration form
Note: The Telguard registration must be completed in advance to avoid installation delays
You must also have certain installation test tools:
Screws and a screwdriver will be required to attach the unit and antenna to the wall.
In order to connect the STC relay outputs and trip input to the alarm panel, solid or
stranded electrical wire will be required. The terminal strips can accommodate solid or
stranded wire from 14 to 22 gauge in size.
A standard telephone or lineman's butt-set is recommended for verifying communication
between the panel and the Telguard.
