TLV-400S H.264/MPEG-2 Professional Digital TV Receiver User’s Manual
3.2.14 CONFIG/AUTO SELECTION DELAY:
This is the delay time to auto select if the input that you have been selected turns to unlock. This
menu works only when you choose AUTO SELECTION. You could set up to 1, 2, 3, 4, 5, or 10 sec.
Example) if you select 3 SEC, the receiver will wait 3 second to get source and after 3 second the
receiver moves to next priority source.
Table 25 CONFIG/AUTO SELECTION DELAY sub menu architecture
CONFIG
AUTO SELECTION DELAY
Choose automatic source selection latency on signal loss for
SOURCE AUTO SELECTION mode. 1 sec, 2 sec, 3 sec, 4 sec,
5 sec or 10 sec.
3.2.15 CONFIG/CVBS OUT
User can select the source of CVBS output. It’s from MAIN or SUB. If the user select the CVBS
OUT as MAIN, the source and the frame rate of SUB video (Composite video) are followed from
those of MAIN video (YPbPr).
3.2.16 CONFIG/SI MODE
User can select SI MODE. It’s from DVB, ATSC.
This menu only affects on the interpretation of SI table. This menu select the receiver as DVB
receiver or ATSC receiver.
It does not convert one type of SI table to another.
3.2.17 CONFIG/INPUT TS QUALITY
User can select the quality of input TS (RF-IN1, RF-IN2, BNC-1 through 5). If user select ‘CBR’, the
value of AV SYNC threshold is set to the selected value at CONFIG –MAIN – VIDEO –
‘SYNCHRONISATION THRESHOLD’ and CONFIG – MAIN – AUDIO – ‘ SYNCRONISATION
THRESHOLD’
And If user select ‘VBR’, the value of AV SYNC threshold is set to 30 frames.
Version 1.8 44
