TLV-400S H.264/MPEG-2 Professional Digital TV Receiver User’s Manual
2.6 V
ERIFYING
D
IGITAL
TV S
IGNAL
D
ECODING
THROUGH
DVB-ASI
OR
SMPTE-310M I
NPUT
(O
NLY
IF
YOU
HAVE
THIS
SOURCE
AVAILABLE
)
Connect TS (transport stream) input (SMPTE-310M or DVB-ASI format) into BNC IN(ASI/SMPTE-310M)-
1 connector. The SMPTE-310M or DVB-ASI mode is automatically detected and user does not need to
configure input connector to tell the receiver the TS mode.
If you were watching video other than composite video, enter the button ‘1’ with numeric button following
ENTER button. The receiver will choose BNC IN(ASI/SMPTE-310M)-1 source for MAIN decoder and tune
to the stream. You may also use CONFIG/MAIN/SOURCE to select BNC-1 as an alternative way.
If you were watching video with composite video, use CONFIG/SUB/SOURCE and select BNC-1. The
receiver will choose BNC IN(ASI/SMPTE-310M)-1 source for SUB decoder and tune to the stream.
Use left and right arrow button at the no menu state2 to select another program in the channel if current
channel shows multiple program.
Other connector BNC IN(ASI/SMPTE-310M)-2~5 can be used similar way only if user choose number 2~5
instead of 1 above.
As above numeric button method can not distinguish BNC-2 selection and RF channel 2 selections, the
receiver will prompt user to choose one.
Example) No menu state1 (INPUT PORT STATUS), B1:L indicates BNC-1 is in LOCK state.
I
-
N
-
S
1 :
C
B
:
4
B
L
B
B
1
K
O
-
:
C
V
D
L
-
B
3
:
2
:
A
B
B
-
:
5
-
>
< >
R
:
-
2
-
R 1 :
In this upper line of the display, B1:L means BNC input-1 is in LOCK state.
R1:- and R2:- means RF-1 and RF-2 is in UNLOCK state and B2:-, B3:-, B4:- and B5:- means
BNC-2, 3, 4, 5 is in UNLOCK state.
In the bottom line of the display, BNC-1:LOCK DVB-ASI means BNC input-1 is locked in DVB-ASI
mode.
Example) No menu state2 (MAIN STATUS) , B1:L indicates BNC-1 is in LOCK state.
/ 2 6 >
I
A
L
1
- 1
S
K
B - A
O
D
D
[
V
T
W
]
C
I
S
V
<
[
]
>
< >
B
C
N
N
- 1
M A I
:
In this upper line of the display, MAIN:BNC-1 means the main channel is taking input source from
BNC Input-1 and DVB-ASI LOCK means BNC input-1 locked in DVB-ASI mode.
In the bottom line of the display, [ASI-1] means BNC input-1 locked in DVB-ASI mode.
[DWTV] is an example of program name currently tuned.
<1/26> indicates that current channel contains 26 programs and user can select another program using <>
arrow buttons.
Version 1.8 22
