TLV-400S H.264/MPEG-2 Professional Digital TV Receiver User’s Manual
CONNECTION, ETHERNET PORT, DESTINATION IP,
MULTICAST IP, PROTOCOL, UDP PORT, TX DATA, TX
MODE, FEC TYPE, FEC COLUMN UDP PORT OFFSET, FEC
COLUMN OFFSET NUMBER, FEC COLUMN NA NUMBER.
BNC
INPUT(ASI/SMPTE310M)
Select input BNC mode. Entries consist of BNC-1, BNC-2,
BNC-3, BNC-4 and BNC-5.
BNC
OUT(AES/ASI/SMPTE310
M)
Select output BNC mode. Entries consist of BNC-1, BNC-2,
BNC-3 and BNC-4.
SYSTEM
Configure system environment. Entries consist of LOCAL TIME
OFFSET, UPGRADE FIRMWARE, LICENSE NUMBER and
SAVE SYSTEM LOG TO FLASH.
NETWORK
Ethernet configuration. Entries consist of ETHERNET,
MANAGEMENT NETWORK.
FAULT
Program fault condition. Entries consist of MAIN, SUB, INPUT
PORT and THRESHOLD INTERVAL.
PRIORITY
Choose automatic source selection priority. Entries consist of
1
st
~ 7
th
.
AUTO SELECTION DELAY
Choose automatic source selection latency on signal loss for
SOURCE AUTO SELECTION mode. Entries consist of 1 sec, 2
sec,3 sec, 4 sec, 5 sec and 10 sec.
CVBC OUT
Choose CVBS output. Entries consist of MAIN, SUB. If the user
select the CVBS OUT as MAIN, the frame rate of SUB video
(Composite video) is followed from that of MAIN video (YPbPr).
SI MODE
Choose SI mode. Entries consist of ATSC, DVB
INPUT TS QUALITY
Choose input TS quality of RF-IN1, RF-IN2, and BNC-IN1~5.
3.2.2 CONFIG/MAIN sub-menu
The MAIN sub-menu allows you to configure MAIN Video setting. There are SOURCE, VIDEO,
AUDIO, SUBTITLE, OSD and TELETEXT sub-menus in the MAIN sub-menu.
<
U
S
R
O
0
0
I N
G /
C
N F
M
S
E >
D
I
V
C
A
I
/
<
E
>
T
V
U
L
4
M E N
:
O
U
A U
I
O
O
B
I
L E
T
T
. . .
D
S
Version 1.8 27
