TLV-400S H.264/MPEG-2 Professional Digital TV Receiver User’s Manual
3. MENU DICTIONARY
3.1 O
VERVIEW
There are six menu entries in top menu, CONFIG, STATUS, SAVE PROFILE, RECALL PROFILE,
DEFAULT and DIAGNOSIS menu, in the TLV-400S receiver. This menu appears when user press
(down arrow) button at no menu state. User can navigate through these menus and control
using the function buttons and numeric buttons. All of the TLV-400S’s functions can be controlled
with these menus.
The menu style can be different from this section depending on the firmware version.
Example)
<
0
0
S
>
T
V
U
L
4
M E N
:
N
C
F
O
G >
A
T
S
I
<
T
F
S
V
U
E P
I
E
.
.
.
L
S
R
A
O
Menu entries in top menu
1. CONFIG
The CONFIG menu is a configuration for the video and audio
output options. It has MAIN, SUB, RF-IN1, RF-IN2, IP RX, IP TX,
BNC OUT(AES/ASI/SMPTE310M), SYSTEM, NETWORK, FAULT,
PRIORITY, AUTO SELECTION DELAY, CVBS OUT, and SI
MODE menu.
2. STATUS
The STATUS menu gives status and information about the
receiver. It has MAIN, SUB, RF-IN1,RF-IN2, INPUT, NETWORK,
VERSION, SERIAL NUMBER, MAC ADDRESS and LICENSE
LEVEL menu
3. SAVE PROFILE
Saving current configuration profiles into 30 different set.
4. RECALL PROFILE
Recalling saved configuration profiles from stored 30 different set.
5. AUTO SEARCH
The AUTO SEARCH menu allows you automatically search the
RF input source in case of VSB or QAM-B reception option. eset
configuration into default mode
6. DEFAULT
Reset configuration into default mode
7. DIAGNOSIS
Provides tool to diagnosis the receiver. (Color bar, AV SYNC)
To return to the previous menu, press the EXIT button. Change the menus using the arrow buttons.
To change the character or number of parameter on sub-menu, point the cursor to the desired position using
Left/Right buttons and change the character using up/down buttons, and modify the number using either
Version 1.8 25
