TLV-400S H.264/MPEG-2 Professional Digital TV Receiver User’s Manual
difference of the satellite frequency with LNB oscillator frequency.
CONFIG/RF-IN1/LNB TYPE/MANUAL MODE: User is supposed to enter L-BAND (IF FREQ)
directly. User need to enter the difference of the satellite frequency with LNB oscillator frequency.
CONFIG/RF-IN1/LNB/LNB FREQ HIGH : ######## KHz unit - High part of LNB oscillator
frequency
CONFIG/RF-IN1/LNB/LNB FREQ LOW : ######## KHz unit - Low part of LNB oscillator frequency
In case LNB TYPE is SINGLE : You can find only one menu CONFIG/RF-IN1/LNB FREQ :
######## KHz and CONFIG/RF-IN1/SATELLITE FREQ menu.
In case of LNB TYPE is UNIVERSAL: You can find two menu LNB FREQ HIGH and LNB FREQ
LOW as well as CONFIG/RF-IN1/SATELLITE FREQ menu.
In case LNB TYPE is MANUAL MODE: You can not see LNB FREQ MENU and be able to see
CONFIG/RF-IN1/IF FREQ menu.
CONFIG/RF-IN1/LNB TONE : Select OFF/22KHz/AUTO. For LNB TYPE MANUAL MODE, AUTO is
not selectable option.
OFF: 22 kHz tone on the LNB input of the satellite tuner is turned off.
22kHz: 22 kHz tone is applied to the LNB input of the satellite tuner.
AUTO: 22kHz tone is applied to the LNB input of the satellite tuner when HIGH frequency oscillator
of universal LNB is selected.
Direct Entry FREQ usage : The FREQ value entered on ROOT MENU is treated as IF FREQ on
LNB TYPE MANUAL MODE mode and treated as SATELLITE FREQ for SINGLE/UNIVERSAL
mode.
3.2.5 CONFIG/RF-IN2 sub-menu
The sub-menus are as same as RF-IN1 sub-menus.
Version 1.8 35
