TLV-400S H.264/MPEG-2 Professional Digital TV Receiver User’s Manual
3.2.10 CONFIG/SYSTEM sub-menu
The SYSTEM sub-menu allows you to configure basic setting of the receiver. There are LOCAL
TIME OFFSET, UPGRADE FIRMWARE, LICENSE NUMBER, and SAVE SYSTEM LOG TO
FLASH sub-menus in the SYSTEM sub-menu.
<
C
L
A
O
0
0
S T
G /
C
N F
S
S
I
E
T
E
M
L
M
Y
I
/
<
O
>
T
V
U
L
4
M E N
:
O
E T
S
F
. .
F
.
>
Table 21 CONFIG/SYSTEM sub menu architecture
CONFIG
SYSTEM
Configure system environment. Entries consist of STATUS
FORMAT, LOCAL TIME OFFSET, UPGRADE FIRMWARE,
LICENSE NUMBER and SAVE SYSTEM LOG TO FLASH.
SYSTEM/LOCAL TIME
OFFSET
Choose the local time offset.
SYSTEM/UPGRADE
FIRMWARE
Upgrade the firmware of the receiver.
SYSTEM/LICENSE
NUMBER
Set license level for the receiver. For Factory Only
SYSTEM/SAVE SYSTEM
LOG TO FLASH
Entries consist of DISABLE, ENABLE. The default value is
DISABLE.
LOCAL TIME OFFSET: The LOCAL TIME OFFSET sub-menu allows you to set local time offset. To set
the time-offset, point the cursor to the desired time position using Left/Right buttons and increase or decrease
the time using up/down buttons. The offset range is from – 11.5 to 12 and it can be increased by +/- 0.5.
Select SAVE to apply it.
UPGRADE FIRMWARE: The UPGRADE FIRMWARE sub-menu allows you to upgrade firmware to newer
version (see more details on Chapter 4: How to upgrade firmware).
LICENSE NUMBER: The LICENSE NUMBER sub-menu allows you to change the License Number of the
receiver (32bytes). The user can check or change the License Number of the receiver. Point the cursor to the
desired position using Left/Right buttons and set the number using up/down buttons or numeric buttons.
Select SAVE to apply it.
License information may be included as an additional sheet. Be careful not to lose or mishandle
this information.
Version 1.8 40
