48
User manual
STEREO QPSK-PAL CI
6.- CONTROLLING THE DEVICE
This version of the QPSK-PAL CI permits
configuration and control from a PC, both
locally and via remote control, by means the
headend control software v.2.1.2 or upper.
a.- Local control
The user must have the "Headend
Management" program (v.2.1.2 or upper)
and a special cable (provided with this pro-
gram) that connects a PC serial port to the
"PRGM" connector of the QPSK-PAL CI.
Using the program, the user can configure
and read all of the parameters, as well as
check that the device is working properly.
It is possible to see that the configurable
parameters are the same as those that can
be configured using the remote control.
Another advantage is that you can select the
program by its name.
b.- Remote control
It is necessary to dispose of a Headend
Control module (ref. 5052) that includes the
previously-mentioned program, and the
corresponding modem connected to the
phone line.
Once communication has been established
with the headend control, it will be possible
to access all the controllable devices that
have been installed in the headend.
In this case, it is essential for each element
to be programmed with a unique device
address using the numbers between 1 and
254.
