47
User manual
STEREO QPSK-PAL CI
ENGLISH
5.3.- PARAMETERS SAVING
Once a parameter is modified to the desired
value in any menu (normal or extended), to
save the settings press
for three
seconds. The display will show the following
indication:
The command should not be withdrawn until
the message disappears.
If the configuration paremeters are modified
but not saved the previous configuration is
retrieved after 30 sec. in other words the
changes are discarded.
Whenever the input channel, frequency or
LNB power is modified, and once the unit
has managed to lock onto the QPSK signal,
an automatic search of all the available ser-
vices will be carried out. While the analysis
is taking place, the display will show the
following message:
Saving
settings and
restarting
...
The time that this process will last depends
on the number of services in the QPSK mul-
tiplex.
Finally, the LEDS indicate the following ope-
rational status:
- Left LED (A) = Enough input level (orien-
tative).
- Central LED (B) = QPSK demodulator
locked.
- Right LED (C) = MPEG synchronization
(audio and/or video synchronized).
When the LEDs are ON indicate a correct
operation. If any of them is OFF it indicates
an abnormal operation.
TIP:
The LED C will turn off any time that the
selected program can’t be correctly
synchronize. This will happen either
when the service is coded or has errors
that CAM does not allow the access.
Processing
Channels
.
g.- Language selection menu
The last extended menu allows the selection
of the menus language
(English/Spanish/German).
By pressing
or
you switch between
different languages.
Note:
It is necessary for the unit to be loc-
ked onto QPSK so that the following
menus can be selected:
- Audio menu
- Audio for language/indez (audio
mode)
- Video format (letterbox, fullscre-
en...)
- Subtitle menu
- Program
LANGUAGE
English
