H30FLEX Sky handheld DVB meter /
Analyzer
22
5.8. Learning plan
(only for administrator users)
Analyzes the input signal to the meter and
automatically detects all channels.
This feature automatically identifies the channels
as either analog or digital and performs
measurements on each.
A bar graph is displayed with the height
representing the power for digital channels and the
level of the video carrier for the analog channels.
The measurements made for analog channels are
video carrier level and V/A. For digital channels the
measurements are power and C/N.
The analog channels will have an extra, smaller
white bar indicating the level of the audio carrier.
5.8.1. Main window
Below is a capture of a Learning Plan window with
a brief explanation of its features:
List of measurements
with pass/fail indicators
Bar graph representing
found channels
Color according to
checkmarks
Indicates that the
scan is finished.
Press
to save
the plan
Selected channel
Change using
slof frequency (1210MHz) and will set the slot
with the meter parameters: frequency, band
(powering), and DiSEqC. In addition, a SCR
icon will be shown in the bar at the top (SCR3)
to indicate thar the slot is enabled.
While the slot is enabled, all the setting
changes of the meter, will be applied to the
currently slot (SCR3).
-
Powering
: Selects the LNB powering
- Span:
Select the number of channels
showed in the bar graph
- Ref. Level:
Select the reference level of the
bar graph
- Screen capture:
Captures the current
screen and saves it as a .png image. You can
see the captures using the remote control
application
5.7. HDMI Input
Displays the image of the HDMI input on the screen
of the
H30FLEX SKY
.
