H30FLEX Sky handheld DVB meter /
Analyzer
16
3.7.- SAT2 Logger
This feature is similar to the Dish Check one, but
in this case the device makes a scan in all the
channels of the plan.
Below is a capture of the SAT2 Logger window
with a brief explanation of its features.
When the scan is finished, the result of the scan is
shown in the screen:
Channel and
Frequency
Use
to
hange
Long press
OK
to
go to Channel Info
Bar graph of power
measurement
Color according to
checkmarks
Power and LKM
measurements
of the selected
channel with
pass/fail indicator
Channel and
Frequency
Use
to
hange
Long press
OK
to go
to Channel Info
Press OK to confirm
SAT2 Logger
and go to the next step
Bar graph of power
measurement
Color according to
checkmarks
Power and LKM
measurements
of the selected
channel with
pass/fail indicator
Result of
the scan
If one or more channels fail, it is considered that
the dish check fails.
4.- Wi-Fi Scan
This feature is a shortcut to the Wi-Fi Scan.
See section
7.4- Wi-Fi Scan
5.- Other
5.1. Channel Info
Analog and digital channels are very different in
terms of signal content and power distribution
and thus require the advanced SLM techniques
provided in the Televes
H30FLEX SKY
.
In analog mode, video and audio levels, V/A and
Carrier to Noise (C/N) are measured.
In digital mode measurements depend on the
modulation:
DVB-S: Power, C/N, MER, CBER, VBER
DVB-S2: Power, C/N, MER, LDPCBER, BCHBER
DVB-T: Power, C/N, MER, CBER, VBER
DVB-T2: Power, C/N, Link Margin, LDPCBER, BCHBER
5.1.1. Main window
Below is a capture of a Channel Info window with a
brief explanation of its features.
