Teletype 43 Teleprinter Basic RO, Service Manual

Page: 75 / 222

PRINTER
A. Removal
3.08 To remove the printer:
(a) Sprocket Feed
C2)
Remove paper holder.
(Perform 3.02a., Step 2.)
0
Remove cover.
(Perform 3.05, Steps 1 and 2.)
LEFT SIDE
FRAME
(Right
Front View)
HOUSING
Loosen two 184058
screws (one each side).
Tilt top of clamps outward,
releasing front isolators
connected to the opcon.
®
Grasp the bustle cover and
slide the printer and rear
frame assembly from the
housing through the rear
opening.
MANUAL 406, 1-65
LEFT PAPER GUIDE
PLATEN
LEFT PAPER STRIPPER
PAPER SEPARATOR
R<mo" 119650 retmniDg
ring from paper separator
shaft.
0
Slide paper separator to the right
until it clears the paper stripper,
and remove.
@
Remove the rear frame assembly.
(Perform 3.06, Steps 1 through 4.)
@
Remove the operator console.
(Perform 3.05, Steps 3, 5, 6 and 9.)
Remove the left and right platen
knobs by pulling straight outward.
NOTCH FOR
FRONT
BUSHINGS
GUIDE
RAILS
Note: To replace the printer, perform 3.09.
PRINT
HEAD
PLATEN
DIRECTION FOR
INSTALLATION
(Push)
REAR
ISOLATORS