Teletype 43 Teleprinter Basic RO, Service Manual

Page: 206 / 222

�
Batch-Send From Buffer
•
Prepare mPssage(s) and store (see Edit Mode).
•
Depress not on.
[]To Originate a Call and Manually Send
•
Establish on-line connection in the usual manner.
•
Request Data mode with distant terminal.
If the distant terminal called is on automatic­
answer, the terminal will respond with a high­
pitched answer tone.
•
When answer tone is heard, enter the Data mode
on the external communications device.
The lamp lights and
turns off.
The terminal is now on-line and ready to com­
municate.
•
Depress the for each message to be
sent.
The
will flash during each message sent
and tum off when all stored messages are sent or
at StpSn in message being sent.
•
Terminate call in the usual manner.
28
Controlled Send
Receipt of a Start Sending code ( StrSn), will cause mes­
sages stored in send buffer to be sent when terminal
is provided with automatic-answer (Modem Option).
•
Prepare message(s) to be sent and stored.
•
Depress not on.
When terminal is called, the following occurs:
1.
Telephone rings and is automatically answered.
2.
An answer-back message may be sent (see
Terminal Option Listing ABaa) when call is
answered.
3.
A message is sent upon receipt of start sending
code ( StrSn).
4. Transmission may stop upon receipt or sending
of stop sending code (StpSn).
5. If send buffer is empty, terminal will send a
negative response upon receipt of (StrSn) code
(up to
6
characters).